| Russound Speaker Selectors |
Russound's SDB Series speaker selectors are dual-source speaker selectors with volume controls.
The SDB Series Speaker Selectors allow you to switch between two amplifiers and up to six pairs of speakers. Dual source operation means two different amplifiers can drive selected speakers simultaneously. Each speaker pair has its own input selector and volume control. Works with all speakers rated 4 Ohms or above.
|
|
|
|
|
|
|
|
Russound's Pro-VC Series speaker selectors are designed with the same sonic transparency as the Pro series selectors - show above. In addition, a volume control for the position "Speaker 1" of the selector to attenuate the main pair of speakers in the room. These selectors
are perfect for systems that share the same amplifier / receiver for their main listening area / home theater and a whole-house distribution system. The volume control of the selector is acting as the main volume control for the primary room while the remaining speakers in the system will have individual
volume controls installed in each room. The maximum volume of the system is controlled by the amplifier / receiver's volume control. The Pro-VC Series selectors have precision-wound autoformers with power handling of 200 Watts per channel. Dual amplifier inputs and selectable
impedance matching add to the versatility of the Pro Series. These selectors work well with 4 Ohm or 8 Ohm amplifiers and can be used with 4 Ohm to 8 Ohm speakers.
|
|
|
|
|
|
|
|
Russound's PRO Series speaker selectors are available in 6, 8 and 12 pair configurations. These selectors satisfy the most demanding requirements. Each impedance matching autoformer is hand wound and only the best associated components are used in the Pro series. In this way, we can be certain they
offer the best in transparent audio performance, high reliability and minimal insertion loss. The Pro Series speaker selectors are rated for a maximum of 200 watts power handling per channel. Dual amplifier inputs and selectable impedance matching add to the versatility of the Pro series. Can be
used with 4 Ohm or 8 Ohm amplifiers and work well with speakers rated at 4 Ohms or above. Heavy-duty, removable screw connections accept up to a 12 gauge speaker wire.
|
|
|
|
|
|
|
|
Connect one amplifier to as many as 6 pairs of speakers. Russound's SS-4 and SS-6 speaker selectors use an automatic impedance matching system to maintain a 4 ohm amplifier load regardless of the control settings. These selectors are rated to handle up to 200 watts and a recommended continuous flow of up to 100 watts. Spring-loaded terminals accept up to a 12 gauge speaker wire.
|
|
|
|
|
|
Russound's AB-2 Speaker Selector is an A/B selector switch in a free-standing metal housing. Thi sunit allows you to connect two amplifiers to a single pair of speakers. This is useful in situations where one pair of speakers is shared by two sources (such as a television and a stereo). To protect your
amplifiers, these units employ a "break-before-make" push button switch. The two-to-one design enables the A509 to operate either as a dual source selector feeding one pair of speakers or as a two-pair speaker selector connected to a single amplifier.
|
|
|
