 |
|
Channel Vision C-0432 Phone Distribution Block
The C-0432 distributes incoming phone lines from the telephone company (TelCo) to multiple telephone jacks throughout your house. Up to 4 TelCo lines can be distributed to 8 locations. Multiple C-0432 blocks can be cascaded using the line-out port - feed your phone lines to as many locations as needed. The Category 5 compliant printed circuit board routes the phone signals from the input port to all output ports making the phone connections simple.
|
|
|
RCA D926 Phone Jack System
The T607, RCA's D926, makes installing a phone jack as easy as plugging in a toaster.
The wireless phone jack turns any power outlet into a phone jack. Simply plug the base
unit in next to the existing phone jack and place the extension anywhere you need
another line. Works with corded phones, cordless phones, answering machines, fax machines
and computer modems. The wireless phone jack system has a built in surge
suppressor and is expandable to as many extensions as you need. The T607 includes a base
unit, extension unit, and a 6 ft. phone cord. Additional extension units can be added as needed,
part number T608. Product Dimensions: 10.9" L x 10.6" W x 1.5" H
|
|
|
RCA WMJ900 Wireless Modem
The T609, RCA's WMJ900 Wireless Modem - The Shark - brings the freedom of wireless
(at its finest) to the world of computing. With the Shark, you can set up your PC or
lap top at any location and surf the Net or connect to your office server for
multitasking functions. It's simple to connect - the base unit connects to your phone
line service and the expansion unit connects to your lap top or PC, providing an instant
invisible connection. The extension unit operates off the battery of the lap top or PC
power, allowing for complete portability and convenience. Product Dimensions: 12"
L x 10" W x 5" H.
More info
|
|
|
Leviton QuickPort Wallplates and Modules
We now carry Leviton's full line of QuickPort wall plates and modules. Numerous
wallplate sizes and configurations to fit almost any wiring need. The modules quickly and
easily snap into place. Available in standard and decora style plates, several colors to
choose from too. Take me there
|
|
|
Leviton 12 Port Patch Blocks
These 12-port patch blocks are commonly used in terminating Category 5 (Cat5) and Category 5
Enhanced (Cat5E) wires used for network distribution. When pulling a Cat5 or Cat5E wire to
each room in the house you may not need all of these wires simultaneously connected to a
computer network hub. The T611 and T612 allow you to connect all of your wire runs (terminate)
to a piece of hardware. Up to 12 wire runs can be connected to the 12 ports on the patch
blocks. A RJ45 patch cable is used to connect the desired port to a network hub.
Product Dimensions: 10" L x 2 3/8" W x 2 1/4" H
|
|
|
Wire Punchdown/Termination Tool
The T605 punchdown tool is a time saving device when installing Category 5 wire. The T605
"punches" the Cat5 wire into place and trims the excess wire all with one motion.
The punch tool is ideal when connecting Cat5 wire to telephone punch blocks, patch blocks, and
phone/network modules that snap-in to wall plates in each room.
|
|
|
Video Balun
The T610 Video Balun allows you to use telephone wire to distribute a video signal.
Send a video signal from a surveillance camera or other video source to another room
in the house using the existing telephone wire. The video signals will not disrupt
phone service or phone call clarity. The compact T610 does not require a power supply,
just connect a video cable and 1-pair of phone wire. Two video baluns needed - 1 to
send, 1 to receive. Product Dimensions:
2 1/2" L x 1 1/2" W x 1 1/4" H.
|
|
|
