Channel Vision's CVT2/8-PIA-II Amplifier is a 3-in-1 distribution system.
Amplifier - A 15dB amp boosts your Cable or Antenna signal
Combiner - The second input allows you to connect a modulator. The built-in combiner adds the modulated signal to the amplified Cable or Antenna signals.
Splitter - An 8-way splitter allows you to connect 8 TV's up to 150 feet away.
The 2/8-PIA is ideal for boosting your Cable or Antenna signal and a modulated signal and ditributing these signals to up to 8 TV's.
The 2/8-PIA comes with a UL listed external power supply (transformer) which plugs into a 110VAC outlet. Power is sent from the transformer to the amplifier
via coaxial cable. Both the transformer and the amplifier have coaxial F-connectors for the power connection. A four foot length of coaxial cable is provided
with the unit. Example diagram
|
|
|
|
Channel Vision CVT2/4-PIA-II Amplifier
The 2/4-PIA-II Amplfiier provides all of the amplifying, combining, and distribution you need for a residential CATV/UHF system with up to 4 televisions. This unit
amplifies your incoming Cable Co. or Antenna signal, combines the signal with a CATV/UHF modulator and distributes both sets
of signals to 4 televisions up to 200 feet away.
The 2/4-PIA-II comes with a UL listed external power supply (transformer) which plugs into a 110VAC outlet. Power is sent from the transformer to the amplifier via coaxial
cable. Both the transformer and the amplifier have coaxial F-connector for the power connection. A four foot length of coaxial cable is provided with the unit.
Example diagram
|
|
|
|
Channel Vision CVT15-PIA Amplifier
The CVT15-PIA is one of the best amplifiers on the market today. A CATV/UHF amplifier is added to a television distribution system to reduce the graininess found on underpowered television channels.
All amplifiers introduce some level of noise onto your CATV/UHF system, the 15-PIA is one of the cleanest amplifiers on the market. This amp is also return-path compliant for use with cable
modems and interactive cable boxes.
The 15-PIA comes with a UL listed external power supply (transformer) which plugs into a 110VAC outlet. Power is sent from the transformer to the 15-PIA via a supplied coaxial
cable. Both the transformer and the 15-PIA have coaxial F-connectors for the power connection. A four foot length of coaxial cable is provided with the amplifier. |
|
|
|
Channel Vision CVT-35IA Amplifier
The CVT-35IA CATV/UHF amplifier boosts your TV signals by an impressive 35dB. The 35IA is primarily used in large residential and commercial applications, such as homes over 6,000 square feet and schools.
The 35IA has a maximum output of 60dB - meaning an amplified signal of up to 25db can be input into the amplifier. The 35IA has an adjustable gain control (+20dB) and an adjustable tilt compensator (+20dB)
built-in. Tilt compensation is used to balance the signal strength of your high and low channels. As channels increase the frequency at which they operate increases too; high frequency channels can not
travel as far as low frequency channels. Tilt compensation is used to balance the signal strength by removing power from the lower channels. The adjustable gain control is then used for a linear increase on
all channels. Tilt compensation is primarily used on coax runs of 300' or more.
The 35IA amplfier has an internal transformer with a 4' power cord attached. The power cord requires a 110VAC 3-prong power outlet. |
|
|
|
Pico Macom MCM-101 Amplifier
Pico Macom MCM-101 10dB Amplifier. Amplifier 50 MHz up to 450 MHz signals. Good for boosting Cable TV channels 2 - 60 OR Antenna channels 2 - 13.
|
|
|
