 |
|
NEW!! Spaun SMS-51602NF HDTV Multiswitch supports the new twin dual LNB systems available from certain DSS providers. A twin dual dual LNB dish has 4 coax cable connections and delivers
signals from two satellites. In order to feed a twin dual LNB dish to more than 2 receivers you must use an HDTV multiswitch. The SMS-51602NF will send the DSS signals to up to 16 satellite receivers.
The fifth input on the multiswitch is for local antenna or cable channels (CATV/UHF). These signals travel on a lower set of frequencies than the DSS signals do and can be distributed on the same coax cable without
causing interference. When using the fifth input a Satellite Diplexer is needed at each TV/Receiver location.
The SMS-51602NF has an amplifier built-in which boosts both the DSS signals and the CATV/UHF signals. The SMS-51602NF does require power from a standard wall outlet to operate. All Spaun multiswitches are hand built in
Germany and are backed by a 2-year warranty.
|
|
NEW!! Spaun SMS-51202NF HDTV Multiswitch supports the new twin dual LNB systems available from certain DSS providers. A twin dual dual LNB dish has 4 coax cable connections and delivers
signals from two satellites. In order to feed a twin dual LNB dish to more than 2 receivers you must use an HDTV multiswitch. The SMS-51202NF will send the DSS signals to up to 12 satellite receivers.
The fifth input on the SMS-51202NF is for local antenna or cable channels (CATV/UHF). These signals travel on a lower set of frequencies than the DSS signals do and can be distributed on the same coax cable without
causing interference. When using the fifth input a Satellite Diplexer is needed at each TV/Receiver location.
The SMS-51202NF has an amplifier built-in which boosts both the DSS signals and the CATV/UHF signals. The SMS-51202NF does require power from a standard wall outlet to operate. All Spaun multiswitches are hand built in
Germany and are backed by a 2-year warranty.
|
|
Spaun SMS-5802 HDTV Multiswitch supports the new twin dual LNB systems available from certain DSS providers. A twin dual dual LNB dish has 4 coax cable connections and delivers
signals from two satellites. In order to feed a twin dual LNB dish to more than 2 receivers you must use an HDTV multiswitch. The SMS-5802 will send the DSS signals to up to 8 satellite receivers.
The fifth input on the 58021 is for local antenna or cable channels (CATV/UHF). These signals travel on a lower set of frequencies than the DSS signals do and can be distributed on the same coax cable without
causing interference. When using the fifth input a Satellite Diplexer is needed at each TV/Receiver location.
The SMS-5802 has an amplifier built-in which boosts both the DSS signals and the CATV/UHF signals. The 5801 does require power from a standard wall outlet to operate. All Spaun multiswitches are hand built in
Germany and are backed by a 2-year warranty.
|
|
Spaun SMS-5602 HDTV Multiswitch supports the new twin dual LNB systems available from certain DSS providers. A twin dual dual LNB dish has 4 coax cable connections and delivers
signals from two satellites. In order to feed a twin dual LNB dish to more than 2 receivers you must use an HDTV multiswitch. The SMS-5602 will send the DSS signals to up to 6 satellite receivers.
The fifth input on the 5602 is for local antenna or cable channels (CATV/UHF). These signals travel on a lower set of frequencies than the DSS signals do and can be distributed on the same coax cable without
causing interference. When using the fifth input a Satellite Diplexer is needed at each TV/Receiver location.
The SMS-5602 has an amplifier built-in which boosts both the DSS signals and the CATV/UHF signals. The 5400 does require power from a standard wall outlet to operate. All Spaun multiswitches are hand built in
Germany and are backed by a 2-year warranty.
|
|
Spaun SMS-5402 HDTV Multiswitch supports the new twin dual LNB systems available from certain DSS providers. A twin dual dual LNB dish has 4 coax cable connections and delivers
signals from two satellites. In order to feed a twin dual LNB dish to more than 2 receivers you must use an HDTV multiswitch. The SMS-5402 will send the DSS signals to up to 4 satellite receivers.
The fifth input on the 5402 is for local antenna or cable channels (CATV/UHF). These signals travel on a lower set of frequencies than the DSS signals do and can be distributed on the same coax cable without
causing interference. When using the fifth input a Satellite Diplexer is needed at each TV/Receiver location.
The SMS-5402 has an amplifier built-in which boosts both the DSS signals and the CATV/UHF signals. The 5402 does require power from a standard wall outlet to operate. All Spaun multiswitches are hand built in
Germany and are backed by a 2-year warranty.
|
|
|
Spaun SMS-3803 Multiswitch distributes DSS signals from a dual LNB dish to up to 8 satellite receivers. A dual LNB dish has 2 coax cable connections and is designed to feed
only 2 satellite receivers independently. A Dual LNB multiswitch is required to send DSS signals to 3 or more satellite receivers. When using a multiswitch all of the satellite receivers connected to the system
have complete access to ALL of the satellite channels and ARE completely independent of the other receivers on the system.
The third input on the 3803 is for local antenna or cable channels (CATV/UHF). These signals travel on a lower set of frequencies than the DSS signals do and can be distributed on the same coax cable without
causing interference. When using the third input a Satellite Diplexer is needed at each TV/Receiver location.
The SMS-3803 has an amplifier built-in which boosts both the DSS signals and the CATV/UHF signals. The 3803 does require power from a standard wall outlet to operate. All Spaun multiswitches are hand built in
Germany and are backed by a 2-year warranty.
|
|
Channel Master 6328IFD Multiswitch distributes satellite signals from a dual LNB dish to up to 8 satellite receivers. Each receiver has complete access to all of the incoming satellite channels and is independent of all other receivers on the system.
The 6328IFD has a third input which inserts CATV or UHF signals onto the same coax cable as the satellite signals. This can be done due to the variance in frequencies at which satellite and CATV/UHF signals operate. Satellite signals travel between 950MHz -1450MHz, well
above the CATV/UHF signals traveling at 40 MHz - 800 MHz. The ability to combine these signals onto a single coax cable allows for multiswitch installation in existing homes - add satellite to your Cable or Antenna system. When using the third input of the multiswitch
to insert CATV/UHF signals, a Satellite Diplexer is needed at each television location. A diplexer is a frequency sensitive splitter used to extract each set of signals from a coax cable. The 6328 does require power from a standard wall outlet to
operate.
|
|
Channel Master 6314IFD Multiswitch expands a dual LNB system from feeding only 2 satellite receivers to up to 4 satellite receivers. Each receiver has complete and independent access of all of the incoming satellite
channels. The third input of the 6314 inserts CATV or UHF signals onto the 4 outputs distributing the satellite signals. This can be done due to the variance in frequencies at which satellite and CATV/UHF
signals operate. Satellite signals travel between 950MHz -1450MHz, well above the CATV/UHF signals traveling at 40 MHz - 800 MHz. The ability to combine these signals onto a single coax cable allows for multiswitch
installation in existing homes - add satellite to your Cable or Antenna system. When using the third input of the multiswitch to insert CATV/UHF signals, a diplexer is needed at each television location. A diplexer
is a frequency sensitive splitter used to extract each set of signals from a coax cable. The 6314 does require power from a standard wall outlet for power.
|
|
Channel Vision SAT-MS34A expands a dual LNB system from feeding only 2 satellite receivers to up to 4 satellite receivers. Each receiver has complete and independent access of all of the incoming satellite
channels. The third input of the 6314 inserts CATV or UHF signals onto the 4 outputs distributing the satellite signals. This can be done due to the variance in frequencies at which satellite and CATV/UHF
signals operate. Satellite signals travel between 950MHz -1450MHz, well above the CATV/UHF signals traveling at 40 MHz - 800 MHz. The ability to combine these signals onto a single coax cable allows for multiswitch
installation in existing homes - add satellite to your Cable or Antenna system. When using the third input of the multiswitch to insert CATV/UHF signals, a diplexer is needed at each television location. A diplexer
is a frequency sensitive splitter used to extract each set of signals from a coax cable. The MS-34A is an amplified multiswitch but not need to be plugged in - it receives its power from the coax connection from a satellite receiver.
|
